Identifying Common Husqvarna Zero Turn Belt Issues Worn or Loose Mower Belt. These issues arise due to normal use, wear, cracking, or damage to the belt, as well as other Debris Buildup in Mower Deck. Debris buildup in the mower deck is another common issue that can lead to mower deck belt
3. Oct 2, 2022 / Husqvarna Z246 spring, deck belt came off. #1. Husqvarna zero turn Z246 - "spring, deck belt" came off. I scalped a ridge on my lawn and the mover blades stopped turning. I found a large spring on the ground, I am fairly certain it is the part called "spring, deck belt". Also the belt is now very loose. If the blades were previously adjusted improperly, they might not engage properly. Check to ensure that the blades are not loose. If they are, tighten them securely with a socket wrench. Make sure your mower is not in the reverse or neutral mode while engaging the blades. Check to make sure that the blade control lever is in the “engage First, you need to find the spark plug, which must be at the front of your Husqvarna Self Propelled Lawn Mower and disconnects its wiring. Once you can see the pin beneath, screw the spark plug using a socket range and replace it with the new one. If you want, however, check the insulator and the electrode. 14 posts · Joined 2017. #1 · May 15, 2017. Hey all. I recently bought a Husqvarna MZ48 with the Clear Cut 48" Deck. I am having terrible issues with the deck skipping grass or leaving "trails" of grass at about center of the deck. This is a brand new machine for this year. I took it to the dealer today that I bought it from and they couldn't Step 4: Remove The Plastic Protective Covers Encasing The Pulleys and Drive Belt. There are plastic covers encasing the pulleys of the Husqvarna mower. The covers serve as protection to avoid debris and dirt from getting into the pulleys of the machine and affecting the drive belt. You will find protective covers at the forefront of the machine